In order to give you a better service Zetadealer uses cookies. By continuing to browse the site you are agreeing to our use of cookies..

close
  • New

100 pcs BASEMENT RLS RAIMONDI LEVELLING SYSTEM 180BASE100

100 pcs BASEMENT RLS RAIMONDI LEVELLING SYSTEM 180BASE100

€5.33
72h
Quantity

  • Guaranteed purchase Guaranteed purchase
  • Fast delivery Fast delivery
  • Right of withdrawal Right of withdrawal

100 pcs  BASEMENT RLS RAIMONDI LEVELING SYSTEM 180BASE100



LEVELING WEDGES



• A perfect installation requires perfect flatness between the tiles.

• Often due to unsightly (caldane) substrates, low thickness and therefore flexible tiles, or large format tiles and therefore heavy even with the utmost care, they can not be placed optimally.

• As a result, tiles that in the laying phase appeared perfectly leveled, when the adhesive took place, on the other hand, they showed differences in level that compromised the appearance.

• All this can be avoided thanks to the use of leveling spacers, which, in addition to maintaining the perfect leveling between the tiles, speed up the installation.

• With the leveling spacers, laying is easy, fast and the tiles remain perfectly leveled.

• Minimum joint / joint width: 1.5 mm. Tile thickness: minimum 3 mm, max 12 mm.

• Both the leveling spacer positioning and removal is quick and easy.



HOW TO USE:

Positioning of the support:

1. After spreading the adhesive insert the support under the tile on the 4 sides.

2. Depending on the tile size, place one or more supports on each side of the tile.

3. Place the tile and beat it with a rubber hammer.

Insertion of the wedge:

1. Insert the wedge into the slot of the support, taking care not to exceed the breaking point.

2. To facilitate the insertion of the wedge we recommend the use of the adjustable traction forceps.

Elimination of support:

When the adhesive has matured, the protruding part of the support separates from the base by beating, in the direction of the escape line, with a rubber hammer or with the foot or with the adjustable traction pliers.

180BASE100