- New

3D4M SIGMA tile cutter for push engraving, large tile support surface and handle suitable for improving breaking operations. The exchange between the incision and breaking positions takes place with a small vertical movement of the handle.
3D4M SIGMA tile cutter for push engraving.
MAX 90 cm.
A double series of cushioned support plates has been inserted on the base to guarantee perfect support and complete stability even for long and narrow tiles.
Handle suitable for improving breaking operations.
The ball bearing engraving wheel is cushioned to engrave thick or embossed tiles with minimal effort.
Double cutting thickness adjustment register.
The adjustable metric bar supporting the tile rotates in both directions up to 45 °.
At 45 ° a second metric scale gives the measurement of the diagonal.
Thanks to the quick positioning button, the main angles normally used are immediately available.
Large tile support surface, with the added convenience of measuring close to the operator.
TECHNICAL FEATURES:
Useful cutting length: 90.5 cm
Diagonal cut: tiles up to 64x64 cm
Cutting thickness: up to 20 mm
Double cutting thickness adjustment register.
The adjustable metric bar supporting the tile rotates in both directions up to 45 °; it is pivoted in the center of the cutting line allowing to obtain the real size of the piece to be cut at any angle.
Thanks to the quick positioning button, the main angles normally used are immediately available.
The metric scale on the support bar in addition to the measurement of the cut piece (X) also displays the height of the cut piece at 45 ° (Y).
The exchange between the incision and breaking positions takes place with a small vertical movement of the handle.
Easily disassembled, it minimizes the overall dimensions during transport.